New Product: EasyOn Rust Primer

New Product: EasyOn Rust Primer

Our newest product is our new rust converter, EasyOn Rust Primer, which is a unique liquid that has the ability to chemically convert rust to a hard metal surface that is ready to be painted overnight.

What is EasyOn Rust Primer?

Easy On Rust Primer is our new Rust Inhibiting coating. It is simple to use and very effective. Just apply Easy On Rust Primer, let it sit overnight, and in the morning, your rust will be gone and the surface will be prepared for finishing.

Easy On Rust Primer causes the rust to change into a different compound, called iron phosphate. Iron phosphate is inert and easy to paint. In fact, since Easy On Rust Primer is water-thin, a finish applied after Easy On Rust Primer will last much longer than a traditional paint job. Paint applied over Easy On Rust Primer leaves no room for oxygen and water to penetrate the metal surface.

Easy On Rust Primer can be used on even the heaviest rust.

How to Convert Rust to a Paintable Surface

With a wire brush remove any loose rust or surface debris. Use a degreaser to remove any oils or greases. With a paint brush or sponge brush apply a coat of Easy On Rust Primer and let dry overnight, wipe of any white powder that develops before painting, repeat process if rust is extra heavy. Use to stop rust bleeding thru to painted surfaces. On finished areas not being painted limit use of Easy On Rust Primer to the rusted area. If product exceeds rusted area wipe with a wet cloth. Do not use below 35 degrees.

Older Post Newer Post