Natural Beauty Color Enhancing Sealer
Natural Beauty is a multi-surface color enhancing sealer that draws out the natural colors of wood and stone surfaces. Use it on decks, siding, patios, and pavers.
FOR USE ON:
Stone: use on all stone surfaces to draw out the natural colors and beauty of the stone and to protect from the rain and sun works great on bluestone, limestone, sandstone and all pavers and patio stones
Wood: use on horizontal decking surfaces and vertical siding surfaces to bring out the natural color and beauty of the wood and also provide maximum protection from the sun and moisture. Works great on all types of wood including; mahogany, cedar, pressure treated, Ipe, bamboo and pine.
Composite Lumber: Use on all composite decking lumber to protect from rain and sun fading or to restore color from a sun faded deck.
1 gallon = 600-800 sq ft. of single coat coverage depending on porosity of the surface.
Apply to a clean dry surface only; surface must be free of old sealer, waxes and other coatings. Surface temperature should be between 50°-80°F. Apply two coats while still wet with a soft bristle brush or roller being careful not to leave excess, avoiding pooling, always brush and roll in every direction to insure complete coverage, apply to large surfaces with a pump sprayer and making sure to back roll or brush out evenly. Dry time: is 15-60 minutes but avoid placing furniture 24 hours, avoid rain water, lawn sprinklers or any water for 24-36 hours. White cloudy sealer has not fully dried. Clean up: clean brushes and containers with hot soapy water.